Edit a Network
  1. Open the Network tool, or from the File menu select Tools and then click Network Manager.
  2. Click the tab corresponding to the type of network you need to edit.
  3. Select the network you need to edit.
  4. Click Properties and configure the network as required.

    Cloud Networks have the following properties.

    • Name. The name used for the cloud network.

    • Provider. The cloud service provider, such as .

    • Profile. The cloud profile used to connect to the cloud network. See .

    • ID. The OCID for the cloud tunneling network. Click Networkto view the subnets on that are available for tunneling traffic.

    Host-only Networks have the following properties.

    • Adapter. The the network adapter for the host-only network.

    • DHCP Server. Settings for the DHCP server used by the host-only network. The DHCP server is built into and manages IP addresses for the network automatically.

    NAT Networks have the following properties.

    • General Options. Network settings used by the NAT network including the network address and mask of the NAT service interface.

    • Port Forwarding. Port forwarding rules used by the NAT network.